Product Range > Machine & Machine tools > Single Shot Oil > Manual Pumps
MANUAL PUMPS
Hand Pump without reservoir MODEL H-7
  • This is a simple pump meant for delivering oil in lubrication line.

  • It is ideally suited for general purpose machine, where pump can be inserted into oil reservoir of the machine or can be mounted separately in machine casing below the reservoir.

  • The pump is actuated by hand pull and release of handle for as many times as per lubrication requirement.

  • It is advisable to attach a suction strainer before the inlet of the pump to avoid damage to pump's piston. This strainer is supplied as optional accessory.

  • Relief valve, if required, is available as optional accessory

cenlub
Pressure : 15 Kg/cm2
Discharge : 7 cc per stroke
Suitable for direct connection of 6mm O.D. Tube


Hand Pump without reservoir MODEL H-250-4
 
  • This pump has its own reservoir.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the Lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system incorporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

  • Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

  • Suitable mounting holes are provided for vertical mounting of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

Pressure : 15 Kg/cm2
Discharge : 4 cc per stroke
Reservoir : 250 cc
Material of Reservoir : Aluminium Casting


Hand Pump without reservoir MODEL H-250-4 A
 
  • This pump has its own reservoir made of ACRYLIC.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system incorporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • The acrylic body of pump facilitates the crosschecking of the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

  • Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

  • Suitable mounting holes are provided for vertical mounting of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

Pressure : 15 Kg/cm2
Discharge : 4 cc per stroke
Reservoir : 250 cc
Material of Reservoir : Accrylic


Hand Pump without reservoir MODEL H-600-6
 
  • This pump has its own reservoir.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system incorporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

  • Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

  • Suitable mounting holes are provided for vertical mounting of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

Pressure : 15 Kg/cm2
Discharge : 4 cc per stroke
Reservoir : 250 cc
Material of Reservoir : Accrylic


Hand Pump with reservoir MODEL H-600-6 PLUS

 
  • This pump has its own reservoir made of Aluminium Die Casting, where the mounting holes are projected on the side.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system incorporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

  • Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

  • Suitable mounting holes are provided for vertical mounting of the pump, projected outside the back wall of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

Pressure : 15 Kg/cm2
Discharge : 6 cc per stroke
Reservoir : 600 cc
Material of Reservoir : Aluminium die casting with Casting with project mounting holes on sides.


Hand Pump with reservoir MODEL H-600-6 A

 
  • This pump has its own reservoir made of ACRYLIC.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system incorporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • The acrylic body of pump facilitates the crosschecking of the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

  • Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

  • Suitable mounting holes are provided for vertical mounting of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

Pressure : 15 Kg/cm2 20 Kg/cm2
Discharge : 6 cc per stroke
Reservoir : 600 cc
Material of Reservoir : Acrylic


Hand Pump with reservoir MODEL H-1700-10

 
  • This pump has its own reservoir.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system in corporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point.

  • Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir.

  • Suitable mounting holes are provided for vertical mounting of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

Pressure : 15 Kg/cm2
Discharge : 10 cc per stroke
Reservoir : 1700 cc
Material of Reservoir : Aluminium Casting


Hand Pump with reservoir MODEL H-2000-10

 
  • This pump has its own reservoir.

  • It is piston type, where piston is actuated by a cam, integral with the handle of the pump.

  • On operating the handle, pump discharges oil.

  • As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on.

  • There is an in-built check valve and pressure reducing system in corporated in the pump.

  • Pump is also equipped with relief valve, which safeguards it from overloading.

  • The total pump is made out of S.S. Material i.e.body of the pump is S.S., piston and cylinder in S.S. while the rubber parts are viton.

  • Suitable mounting holes are provided for vertical mounting of the pump.

  • Pump outlet is suitable for 6 mm dia tube.

  • The pump is suitable for water operation as well as other chemicals.

Pressure : 48 Kg/cm2
Discharge : 10 cc per stroke
Reservoir : 2000 cc
Material of Reservoir : Stainless Steel
Rubber Parts : Viton