Product Range > Machine & Machine Tools > Single Shot Oil > Controllers & Timers    

ELECTRONIC CONTROLLER

  • Electronic Controller are high performance solid state instruments, intended for automatic control and monitoring of CENLUB centralised lubrication systems.

  • It provides precision control of lubrication cycle.

  • It also has the facility of monitoring oil pressure and low oil level in the reservoir.

  • Visual indications are given on the front panel to give "lub fault" or "fill oil" display.

  • A fault relay enables the user to activate any corrective or display device in case of fault.

    ECC-1002XDigi
    ON time – 5 sec. (after pressure switch signal). OFF time – 2, 4 ,8, 15, 60, 120, 240 min {digital} (with lubrication fault & low level signal (wall mounting type).

    ECC-1002XPDigi
    ON time – 5 sec. (after pressure switch signal).
    OFF time – 2, 4 ,8, 15, 30, 60, 120, 240 min {digital} (with lubrication fault & low level signal (panel mounting type).

  • Operating Voltage

    : 110 or 240 V AC (User Selectable) / 50 Hz.

    Operating Voltage Range

    : 85 to 110 % of nominal range.

    Operating Mode

    : Time controlled

    ELECTRONIC TIMER

  • Electronic Timers are high performance solid state instruments, intended for automatic control and monitoring of CENLUB centralised lubrication systems.

  • It provides precision control of lubrication cycle.

  • It also has the facility of monitoring oil pressure and low oil level in the reservoir.

  • Visual indications are given on the front panel to give "lub fault" or "fill oil" display.

  • A fault relay enables the user to activate any corrective or display device in case of fault.

    The various models are :

    ELECTRONIC TIMER

    ET-5-30 : ON time – 5 sec (fixed) OFF time – 5/15/30 mts (settable)

    ET-60-240 : ON time – 5 sec (fixed) OFF time – 60/120/240 mts (settable)

    ET-2-30/2-60 : ON time – 2-30 sec (settable) OFF time – 2-60 mts (settable)

    Digital 999-5 : ON time – 5 sec (fixed) OFF time – 1 to 999 mts (settable in digits with count down facility)

  • Operating Voltage

    : 110 or 240 V AC (user Selectable) / 50 Hz.

    Operating Voltage Range

    : 85 to 110% of nominal range

    Operating Mode

    : Time Controlled